Thickness: 0.25-1.5mm
Width: 900-1250mm
Al-zinc Coating: 50-150g/m2
Internal Diameter:508mm
Coil Weight: 4-8MT
Quality: commercial and structural quality
Surface Treatment: oiled & dry, chromated, anti-finger, non-skin pass/ skin pass
Standard: JIS G 3321, ASTM A792M, EN 10215
Steel Grade: SGCC, SGCD, CS,FS,SS，DX51D+Z DX52D+Z; S200GD, S220GD, S280GD, S350GD
Package: full wrapped with anti-damped paper inside, iron sheet wrapped outside, and bundled by iron strips

It can be widely used in transportation, light industry, civil usage and farming. It is also the perfect building material in construction for making roofing tile, steel profiles for wall partition, T-bar, studs, fireproof door, air conditioning duct and home appliance.

Chemical Composition
C: 0.04-0.06%
Si: 0.01-0.03%
Mn: 0.18-0.22%
P: 0.014-0.016%
S: 0.006%-0.009%

Technical Data
Yield Strength: (Mpa) 280-320
Tensile Strength: (Mpa) 340-390
Elongation: 20%-30%
Out-of-square: not exceed 1%
Flatness
Bow: 15mm max
Edge Wave: 9mm max
Centre Buckle: 8mm max
Bending At 180 Degree: no crack, peeling and fraction